Yellow Rhythmic Seed

Support

The manuals

Two guides, as PDF files. Click one to open it.

Quick Start Full manual

The Quick Start takes you from installing it to your first export. The full manual goes through every page and every control.

Stuck?

Do these in order.

  1. In Chop & Pitch, press ? HELP at the top right and point at the thing you are stuck on. A box tells you what it does.
  2. Still stuck? Open the full manual. It goes through every page and every control.
  3. Still stuck? See if your issue is in the questions and answers on this page.
  4. Still stuck? Write to info@yellowrhythmicseed.com

Think you have found a bug?

Send a report from the app. It is one file, and it tells me what happened.

  1. Leave the fault on screen if you can. A report cannot be made after the app has closed.
  2. Click the Yellow Rhythmic Seed name at the top left of the Chop & Pitch window.
  3. Press Report a problem.
  4. Type what you did, and what went wrong, in your own words.
  5. Press Save report file and choose where to save it.
  6. Email that file to info@yellowrhythmicseed.com

The file holds your project and its sample, a picture of the window, the list of what you did before it happened, and how hard the audio was working. It does not record sound.

Installing and updating

My DAW does not show the plugin.

Nearly always the DAW has not looked for new plugins yet, or it is looking for a different type.

  1. Close the DAW and open it again. Many DAWs only look for plugins when they start.
  2. Use the right type for your DAW: Audio Unit in Logic and GarageBand; VST3 in Cubase and Bitwig; either one in Ableton Live.
  3. In the DAW's settings, switch that type on if it is off, and press its button to scan for plugins again.
  4. Chop & Pitch is an instrument. Look for it in the list of instruments, not in the list of effects.
  5. On a Mac with Apple silicon, make sure the DAW is not running in Rosetta mode. See 1.2.
Does it work on an Intel Mac?

No. Chop & Pitch needs a Mac with Apple silicon (M1 or newer) and macOS 12 or newer.

One trap on an Apple silicon Mac: a DAW that is set to open "using Rosetta" runs as an Intel program, and it cannot see Chop & Pitch.

  1. Close the DAW.
  2. In Finder, open Applications and click the DAW once.
  3. Press Cmd+I (Get Info).
  4. Take the tick out of Open using Rosetta.
  5. Open the DAW again.
macOS says the app cannot be opened.
  1. Make sure you used the installer from your receipt email, not a copy passed on from somewhere else.
  2. Open System Settings, then Privacy & Security.
  3. Scroll down. If there is a line about Chop & Pitch, press Open Anyway.
  4. If it still does not open, write to info@yellowrhythmicseed.com and say which macOS you have.

Getting it

Which computers does Chop & Pitch run on?

A Mac with Apple silicon (M1 or newer). It comes as an app that runs by itself, as a VST3 plugin and as an Audio Unit.

A Windows version is in testing. There is no date for it yet.

Is it really free?

Yes. There is no license key, no trial and nothing to unlock. If you like it, you can leave a donation in the shop: any amount, or nothing.

  1. Go to yellowrhythmicseed.com and press Download Chop & Pitch.
  2. In the shop, type 0 to get it for nothing, or the amount you want to give.
  3. Open the email the shop sends you, and use the download link in it.
  4. Open the installer when it has downloaded.
Do I need to be on the internet to use it?

No. You need the internet only to download it.

Getting started

I opened the app and my last session is gone.

The app always starts empty. That is on purpose.

Why? It remembers your machine - your audio device, your MIDI setup - and never your music, so it can never open with someone else's sound or an old mistake in it.

To keep a session in the app:

  1. Press Save (top right) and give the project a name.
  2. Next time, press Open and choose it.

In a DAW you do not need to do this.

The roll filled itself with notes when I opened the Sequencer page.

Yes. The app lays your chops out for you.

Why? Most people press Chops to roll first, every time. So a break with no chops gets one long note, and a chopped break gets one note for each slice. The roll follows your chops until you change the roll yourself.

To lay the chops out again after you have changed the roll:

  1. Open the Sequencer page.
  2. Press Chops to roll. It replaces what is on the roll.
I hear clicks when a note loops or goes round.

Your chops are not on zero crossings.

Why? A chop placed on the Grid lands wherever the wave happens to be at that moment. Each time a slice starts again - Stack, a looped note, a release that loops - it starts from that point, and a wave that starts away from silence makes a click. A saturator or a distortion on the channel makes it far more obvious.

  1. Open the Chop page.
  2. Set Snap to Zero, or to Trans+zero.
  3. Move each chop a little, or chop the break again. Each chop now lands where the wave crosses silence.
  4. Play it again.
I held a key and heard a lovely sweep. Resample all printed something else.

Resample all prints the SEQUENCER, not the key you are holding.

Why? It runs your arrangement from the top for one full cycle and records it. It cannot know which key you had down. So an envelope triggered by Note starts again on every note of the sequence. With the break laid out, that is every chop - a slow sweep only gets a quarter of the way each time. Held on one key, it ran the whole bar.

The quick way:

  1. Open the Modulate page.
  2. Click the tab of the envelope that makes the sweep.
  3. Set its Trigger to Bar or Loop.
  4. Press Resample all.

Or with one long note:

  1. Open the Sequencer page.
  2. Take the notes off the roll.
  3. Draw one long note of the slice you held, as long as you held it.
  4. Press Resample all.
Why can't I choose Stack? It is greyed out.

Stack works in CHR-PHRASE only. In DAW-SEQ, INT-SEQ and CHR-LOOP the button is grey.

Why? Stack needs separate notes. It waits for a note to END, then leaves that note looping round its chop while it fades, and the loops pile up. In CHR-PHRASE a key plays your sequence, and a sequence is made of notes - each one has an end for Stack to work from. In CHR-LOOP a held key is ONE note that runs through the whole chopped loop. None of the chops inside it ends on its own, so there is nothing for Stack to catch.

  1. Open the Sequencer page. Your chops are laid out as notes, in order. (If you have changed the roll, press Chops to roll to lay them out again.)
  2. Press CHR-PHRASE.
  3. Set Voices to Poly. In Mono the next note cuts the loop.
  4. Turn the Release up.
  5. Light Stack.
  6. Hold a key. It plays the same loop at that key's pitch, and every chop leaves its loop behind.
I press the keys and nothing happens - or the wrong thing happens.

The Play mode decides what a key does. Most of the time the mode is not the one you expect.

  1. Look at the Play mode switch on the transport row.
  2. DAW-SEQ: each key plays one chop. The key named in First chop note plays chop 1, the next key up plays chop 2, and so on. Keys below it play nothing.
  3. INT-SEQ: the sequence inside Chop & Pitch plays when you press Play. The keys are not what plays it.
  4. CHR-LOOP: a key plays the break at that key's pitch. The Root note plays it as it is.
  5. CHR-PHRASE: a key plays your sequence at that key's pitch. The roll needs notes on it.
  6. In a DAW, check that the track is an instrument track, that it is armed or monitored, and that your keyboard is its MIDI input.
  7. If the plugin shows a box that says LOCKED, see 2.7.
Which of the four Play modes do I use?
  • DAW-SEQ - your DAW is the sequencer. Play the chops from the DAW's own MIDI clips or from a keyboard. One key, one chop.
  • INT-SEQ - Chop & Pitch is the sequencer. Arrange the chops on the roll inside it. The DAW's Play and Stop run it, in step with the song.
  • CHR-LOOP - play the whole break up and down the keys. Hold a key and the break runs at that pitch. Chords in Poly.
  • CHR-PHRASE - play your SEQUENCE up and down the keys. Hold a key and the notes on the roll play at that pitch.

In every mode the tempo follows your DAW.

My break is not in time with my song.

Chop & Pitch has to know how long the break is in bars and beats. From that it works out the break's own tempo and fits it to the song.

  1. Open the Chop page.
  2. In Tempo match, set Bars and Beats to the real length of the audio - for example 2 bars and 0 beats.
  3. Look at Original BPM. It should now read the tempo the audio was made at.
  4. Play. In a DAW the break follows the DAW's tempo. In the app, set the project tempo yourself.

If the audio has silence before its first hit or after its last, trim it first, or the length will be wrong.

When I play a note higher, there is a gap after it.

With V-Speed, pitch and speed move together, the way a record or a sampler does. A slice played higher is over sooner, and the next one still comes on the beat. The space between them is the gap.

Fill the gap:

  1. Open the Chop page.
  2. In Fill the gaps, turn Fill up.
  3. Use Tone, Seam and Reach to shape the fill to taste.

Or let the slice ring instead:

  1. Turn the Release up, so that each slice fades over the gap.
T-Stretch makes my drums sound soft.

That is the nature of a time stretch. It changes the speed and keeps the pitch, and the price is a little smearing of the sharp hits. It shows most on drums, and most when the tempo is far from the break's own.

  1. For drums, use V-Speed. Nothing is invented, so the hits stay sharp; the pitch moves with the tempo.
  2. Keep T-Stretch for musical material, and for tempos near the original.
The app makes no sound. (Not in a DAW.)

The app is sending its sound to a different output.

  1. Open the Config page.
  2. In the audio settings, choose your Output - your speakers, headphones or audio interface.
  3. Press Play. Watch the Peak meter at the top: if it moves, sound is leaving the app, and the fault is after it.
My MIDI keyboard does nothing in the app. (Not in a DAW.)

The app has not been told to listen to it.

  1. Plug the keyboard in and switch it on.
  2. Open the Config page.
  3. In the MIDI inputs, tick your keyboard.
  4. Play a key. If nothing sounds, see 3.8.
I hear a click each time my envelope goes round to its start.

There is a sudden jump in the line you drew, most often at its end.

Why? An envelope moves a control - a filter, a level - along the line. Where the line drops or rises straight, the control jumps in no time, and a jump is a click. A filter makes it very easy to hear. On an envelope that loops, the app ties the last point to the first, so the join itself has no jump - but a straight drop just before it (the end of a saw) does.

Look at where the line ends and where it has to be when it starts again. Then do one of these.

Give the drop some time.

  1. Open the Modulate page and pick the envelope.
  2. Find the straight drop: two points one above the other.
  3. Drag one of the two a little to the side. The drop is now a short slope.

Or round it off with one dial.

  1. Open the Modulate page and pick the envelope.
  2. Turn Smooth up a little.
  3. Play, and turn it up until the click is gone.

Or soften one corner.

  1. Hold the mouse beside the point at the corner. The pointer becomes two arrows.
  2. Drag into the bend. The corner goes round.
I pressed T-Stretch. In CHR-LOOP or CHR-PHRASE a higher key still plays each chop faster.

That is right.

Why? T-Stretch is there to fit your audio to the project tempo, one time, without pitching it up or down the way V-Speed does. It is a one-time thing, to get the audio in time at the start.

Once that is done, the audio is chopped and acts like a normal sample, with no time stretch. So a higher key plays each chop higher and faster, and a lower key plays it lower and slower, as any sampler does. The key that plays it as it is, is the Root note.

Playing in a DAW

Why can't I automate the plugins inside Chop & Pitch from my DAW?

Your DAW can automate Chop & Pitch's own controls. It cannot reach the plugins you load inside it.

Why? When a plugin opens, it hands your DAW a list of its controls. The DAW expects that list to stay the same for as long as the project lives. Chop & Pitch's own controls are always the same, so they are on the list. The plugins you load inside it are not: you can load any plugin, swap it or take it out, and every one has different controls.

Think of a remote control with printed buttons. It can work the TV it was made for. It cannot grow new buttons each time you plug a different box into the back of the TV.

With an envelope:

  1. Open the Modulate page.
  2. Click an envelope's tab.
  3. Click Target, go to the plugin, and pick the control.
  4. Draw the shape and switch Modulation on.

Or chop by chop, with a slice mod:

  1. Open the Chop page.
  2. On a slice mod, click the target and pick the plugin's control.
  3. Set the envelope over each slice.

Both follow your DAW's tempo, and both are printed when you press Resample all.

If the effect must follow a line drawn in your DAW:

  1. Take the effect out of Chop & Pitch.
  2. Load it on the DAW track, after Chop & Pitch.
  3. Automate it in the DAW in the normal way. It then works on the whole output, not on one Pod.
Which of Chop & Pitch's own controls can my DAW automate?

Twenty of them: the chop filter (cutoff, resonance, envelope amount), the amp envelope and the filter envelope (attack, decay, release, and the bend of each), and the faders. They are in your DAW's automation list by name.

  1. In your DAW, open the automation list of the Chop & Pitch track.
  2. Pick a control, for example Filter cutoff.
  3. Draw the line, or record a move of the control itself.
My song is not in 4/4. The bars do not line up.

Chop & Pitch works in 4/4 only.

Why? The pattern, the Pods and an envelope's Bar trigger all count four beats to the bar. A song in another time signature still plays, and the tempo still follows the DAW, but the bars will not agree with the song's.

I pressed Play in the middle of the song and the first note was missing.

A note that is already under way at the place where you press Play is not heard. The next one is.

Why? A DAW treats every MIDI note the same way: it sends a note when the song passes its start, and you started after it.

  1. Put the DAW's playhead a little before the note.
  2. Press Play.

Effect plugins inside Chop & Pitch

How do I change the order of my insert plugins?

Drag a plugin by its name.

  1. Open the Mixer page.
  2. Put the pointer on the plugin's name. The pointer becomes an open hand.
  3. Drag the name to another row of the same channel. A see-through copy follows the pointer.
  4. Let go. The other plugins make room.

The plugin keeps its settings and its switches, and every envelope, slice mod and sequencer lane that drives its controls follows it. One Undo puts it all back. A plugin cannot be dragged to a different channel.

I chose a plugin into the last row and it went further up.

A plugin always lands straight after the last one in use, so there are never empty rows between plugins. When you take one out, the ones below it move up.

To put a plugin somewhere else in the chain, drag its name. See 5.1.

I took a plugin out and my envelope lost its target.

An envelope, a slice mod or a sequencer lane that drove a control of that plugin now points at nothing.

Why? The plugins below it moved up one row. If the envelope had stayed on that row it would now be driving a different plugin.

  1. Press Undo to bring the plugin back, with everything that pointed at it. Or:
  2. Load the plugin again, and choose the control as the target again.
A plugin's list of controls is full of entries called MIDI.

Chop & Pitch leaves those out. If you still see them for one of your plugins, tell us which plugin.

Why? Many plugins report a slot for every MIDI controller after their real controls - hundreds of them. They are not controls you can turn.

  1. Write to info@yellowrhythmicseed.com.
  2. Tell us the name of the plugin and who makes it.
  3. A picture of the list helps.
Where do I scan for my effect plugins?

On the Config page.

  1. Open the Config page.
  2. Press Scan plugins.

It looks for VST3 effects and, on a Mac, Audio Units as well. A plugin that is installed as both is shown once, as its VST3. The first scan can take a few minutes.

The list is shared: a scan in the app is there in the plugin, and a scan in the plugin is there in the app. In a DAW the scan is done by a small helper program inside the plugin, so an effect that crashes while it is being looked at cannot take your DAW down.

If the scan stops on one plugin. Some plugins never answer, and some open a window of their own - a licence or a sign-in - and wait for you. After 15 seconds a box names the plugin.

  1. If that plugin has opened a window of its own, finish there first, then press Keep waiting.
  2. If not, press Skip this plugin. The scan goes on without it.

A skipped plugin is left out of later scans too, as one that crashed is. At the end, one box names what was skipped and what could not be opened.

To bring a skipped plugin back - for example after buying its licence:

  1. Open the Config page and press Skipped plugins.
  2. Choose the plugins to look at again.
  3. Press Try again. Those plugins are scanned straight away, and a box at the end says which could still not be opened.
I put a plugin like Ozone on, and the keys feel late.

That is the plugin, and it is normal. Some effects need to look a little ahead to do their job - a mastering limiter like Ozone, a look-ahead limiter, a linear-phase EQ - so they hold the sound back for a moment.

Chop & Pitch takes care of that delay wherever it can:

  • It keeps its own channels lined up with each other.
  • Every print takes the delay off: Print to Pod, Resample all, Sequence to WAV and Export to folder all start exactly on the beat.
  • Inside a DAW it tells the DAW how late it is, so the DAW lines the track up with your other tracks.

What it cannot take away is the feel when you play the keys live: nothing can play sound the plugin has not let out yet.

  1. While you play, switch the plugin to its low-latency or "live" mode, if it has one.
  2. Switch it back to its full mode before you print.

Export and files

I pressed Export and I cannot hear my effects, my envelopes or my filter.

That is on purpose. An export is the plain cut: the audio in the editing layer, cut at your chop points, at the project tempo. Nothing is applied on the way out - no chop filter, no envelopes, no slice tuning, no Fill, no mixer effects, no Character, no modulation.

Why? Effects have tails. A delay or a reverb rings on past the end of a chop. If the export applied the effect to each chop on its own, the tail would be cut off where the chop ends - and whatever you had already shaped would be applied a second time.

Render it in first:

  1. Shape the sound: envelopes, filter, mixer effects, modulation, a sequence.
  2. Press Resample all. That prints everything you hear, tails and all, back into the editing layer.
  3. Place your chops on the new audio.
  4. Open the Export page and export.

The tails now sit inside the next chop, where they belong, and nothing is doubled.

What can I export?

WAV files - one for each chop - for a DAW, a sampler or any other device. Or a disk for an Akai S950 or S1000.

Which audio files can I load?

WAV and AIFF, and also FLAC, MP3 and Ogg. Mono or stereo.

  1. Drag the file onto the Chop & Pitch window. Or:
  2. Press Load... and choose it.
Resample all replaced my break. How do I get the old one back?

Press Undo. One press puts the old break back, with its chops.

Why does it replace it? Resample all prints what you hear back into the editing layer, so that you can chop the result and go again.

  1. Press Undo (top right).

To keep the break AND have the print, next time:

  1. Print to a Pod instead. The Pod holds the print, and the editing layer keeps your break.

See Chop & Pitch